Introduction
Tired of pedaling a few hours a day and feeling exhausted? Here we have the right equipment for you. Use our conversion kit to easily convert your bike into an electric bike. The integrated fuse can protect the motor at any time.
Features
– Assistant Sensor allows you to drive without throttle response. You can operate your electric bike however you like. Avoid uncomfortable wrist positions during long-distance rides and pedal smoothly anytime, anywhere.
– Powered by a brushless gear motor, light weight, low noise, stable operation, long service life, you can easily cross any difficult terrain while enjoying the journey to your destination. Very suitable for everyday use, on the way to work and on long-distance trips.
– The maximum load capacity for driving is 150-250 kg. The double-walled alloy wheels have reinforced stainless steel spokes for added tension. The top speed can reach 32-38km/h and the efficiency is ≥80%. Effective braking force is generated as soon as the brake is applied.
Specification
– Project Type: Electric Bike Modification Kit Rear Cassette Freewheel
– Materials: Mixed
– Weight: 12kg
– Size: 20/24/26/27.5/28/29/700c inches
– Motor: 250/350/500/1000/1500W
– Controller: 36V/48V
– Mounting Hole: Rear Drive Hole 135-142mm
Included
1. Motor rim x1
2. Controller x1
3. Display x1
4. Thumb Gas x1
5. Electronic brake x1
6. Sensor x1
7. Brake Sensor x1
8. Motor adapter cable
9. Controller Pack x1
Powerful and Efficient
The maximum speed is about 35km/h, and the powerful and powerful motor can greatly improve the driving comfort. The conversion kit is suitable for 20″/24″/26″/27.5″/28″/29″/700C wheels, suitable for most bicycles, city bikes, mountain bikes, touring bikes, and commuter bikes.
Display
Upgrade your electric bike conversion kit to a display. It displays all the basic information like battery percentage, speed, total one-way distance, wattage, level, and error code for easier troubleshooting.
Package Contents
The electric bike conversion kit includes all components required for installation; Hub Motor, Controller, Display, Throttle, Brake Levers, Pedal Assist System, Torque Arm, and Zip Ties, etc. We will provide you with a controller bag for free! (Note: battery is not included)
Precautions for Installation
The power and voltage of the battery you buy should match our settings. During installation, make sure that the cables are not mixed up. Otherwise, the product may be damaged. It only takes 1-2 hours for one person to complete the change.
If you have any questions, please email us. We will reply to you within 24 hours and provide you with the best service.
