Buy now from Amazon

Product Review: 54.6V Lithium Battery Charger for 48V eBike Mobility Scooter 13S Batteries Pack

Are you in need of a reliable and efficient charger for your 48V eBike or mobility scooter? Look no further than the 54.6V Lithium Battery Charger. With an output of 54.6V and 1.5A, this charger is specifically designed for 13S lithium batteries and ensures convenient and safe charging for your electric vehicle.

Global Compatibility and High Efficiency

One of the standout features of this charger is its global compatibility with an input voltage of AC 100-240V 50/60Hz. This means that you can use the charger in various countries without the need for a voltage converter. Additionally, the charger boasts high efficiency, with a soft starting current that reduces the impact of the AC input effectively. Despite its powerful performance, the charger is compact in size and lightweight, making it ideal for travel and everyday use.

Convenient Design and Ease of Use

The 54.6V Lithium Battery Charger comes with a cable length of 39.4 inches (100 cm), providing ample reach for charging your eBike or scooter. The charger features an indication light that turns green when the battery is full and red when it is charging. It also stops automatically when the battery reaches full capacity, preventing overcharging and extending the lifespan of your battery.

The charger is equipped with a DC connector in two sizes: DC5.5 x 2.1mm and DC5.5 x 2.5mm, ensuring compatibility with a wide range of devices. The charger’s maximum operating temperature is 40°C, and the case is made of high-quality plastic with a smooth appearance free of impurities.

Efficient Charging and Battery Protection

During operation, the LED indicator on the charger changes to red, indicating that the charging process is underway. The charger may become warm during use, but you can place two small blocks underneath it for better heat dissipation. The charger is designed to automatically detect when the battery is fully charged, provided it has a Battery Management System (BMS) installed, and will switch off to prevent overcharging.

Proper Usage and Care Instructions

1. Charge in a Dry Environment

It is essential to charge the battery in a dry environment to prevent damage and ensure safe operation.

2. Avoid Leaving the Charger Connected When Not in Use

Do not keep the charger connected to the power supply when it is not in operation, as this can pose a safety hazard.

3. Prevent Overcharging

Remove the charger from the battery when the LED indicator turns green to avoid overcharging, which can damage the battery.

4. Charge Before Draining the Battery Completely

It is recommended to charge the battery before it reaches 0% capacity to protect the battery and prevent damage.

5. Charge Before Prolonged Inactivity

If the battery will not be in use for an extended period (2-3 months), charge it before storing to ensure it remains in good condition.

6. Perform Regular Deep Discharges

Occasionally, conduct a deep discharge of the battery every 3 months to activate the long-term immobilized material within the battery and maintain its performance.

7. Use Only with Compatible Batteries

Ensure that the battery type matches the charger’s specifications, as using the charger with a different battery type can cause overheating and damage.

8. Safe Charging Procedure

When charging, connect the battery to the charger cable first and then plug the charger into the AC power source. After charging is complete, disconnect the power source before removing the battery plug to prevent damage.

With its user-friendly design, efficient charging capabilities, and built-in protection features, the 54.6V Lithium Battery Charger is a must-have accessory for eBike and mobility scooter owners. Invest in this reliable charger to ensure the longevity and optimal performance of your electric vehicle’s battery.

Read reviews on Amazon

Pin It on Pinterest

Share This